Datsun 260Z
Coordinates 37.7840449,-122.4815291
Picture dated June 2008
The Nissan S30 (sold in Japan as the Nissan Fairlady Z and in other markets as the Datsun 240Z, then later as the 260Z and 280Z) was the first generation of Z GT two-seat coupe, produced by Nissan Motors, Ltd. of Japan from 1969 to 1978. It was designed by a team led by Mr. Yoshihiko Matsuo, the head of Nissan's Sports Car Styling Studio. HLS30 was the designation of the left-hand drive model and HS30 for the right-hand drive model. The 280Z introduced a 2+2 to the range
This model was sold in the United States for the 1974 model year only, but was available in other countries until 1978. The engine was enlarged over that of the 240Z with a longer stroke to 2.6 L. In the U.S., federal emissions regulations forced a reduction in ignition timing and compression ratio, resulting in a lower power output (140 hp)[citation needed] for the 260Z despite the additional displacement, whereas in other countries the power output increased to 165 bhp (123 kW; 167 PS). There was also a 1974.5 model sold through the second half of 1974 in the U.S that had the full 165 bhp (123 kW; 167 PS) with the addition of the larger 5 mph safety bumpers, that would become the standard for the 280Z.
Late 1974 U.S. 260Z models (often referred to as 1974.5 models) carried the heavier bumpers that would remain on the 1975-76 model years of the 280Z so as to be in compliance with United States bumper legislation in 1973. These late cars had the front turn signals relocated to the outer edges of the front grill, above the bumper.
For more information see here.
Other Streetview Classic Cars in this location
Coordinates 37.7840449,-122.4815291
Picture dated June 2008
The Nissan S30 (sold in Japan as the Nissan Fairlady Z and in other markets as the Datsun 240Z, then later as the 260Z and 280Z) was the first generation of Z GT two-seat coupe, produced by Nissan Motors, Ltd. of Japan from 1969 to 1978. It was designed by a team led by Mr. Yoshihiko Matsuo, the head of Nissan's Sports Car Styling Studio. HLS30 was the designation of the left-hand drive model and HS30 for the right-hand drive model. The 280Z introduced a 2+2 to the range
This model was sold in the United States for the 1974 model year only, but was available in other countries until 1978. The engine was enlarged over that of the 240Z with a longer stroke to 2.6 L. In the U.S., federal emissions regulations forced a reduction in ignition timing and compression ratio, resulting in a lower power output (140 hp)[citation needed] for the 260Z despite the additional displacement, whereas in other countries the power output increased to 165 bhp (123 kW; 167 PS). There was also a 1974.5 model sold through the second half of 1974 in the U.S that had the full 165 bhp (123 kW; 167 PS) with the addition of the larger 5 mph safety bumpers, that would become the standard for the 280Z.
Late 1974 U.S. 260Z models (often referred to as 1974.5 models) carried the heavier bumpers that would remain on the 1975-76 model years of the 280Z so as to be in compliance with United States bumper legislation in 1973. These late cars had the front turn signals relocated to the outer edges of the front grill, above the bumper.
For more information see here.
Other Streetview Classic Cars in this location